Status Reporter Parameters

Discussion in 'DALI Software' started by tuzzmaniandevil, Jan 15, 2014.

  1. tuzzmaniandevil


    Jan 15, 2014
    Likes Received:
    Christchurch, New Zealand
    Hi All,

    I've been playing around with the Dali Reporter Software and found in the DALI training manual you can status the report software to automatically start doing a test with the following command:
    c:\Clipsal\DALIcontrol\StatusReport.exe {Template Number} {Test Name}
    eg. c:\Clipsal\DALIcontrol\StatusReport.exe 001 "Lighting Status Test"

    That works Great, just wondering if Status Report supports more parameters like to close Status Reporter once the test is complete or to be able to select a Duration Test or Extract Data on a Emergency template?

    Not sure if this is wishful thinking but it would make my life a lot easier.:)
    tuzzmaniandevil, Jan 15, 2014
  2. tuzzmaniandevil


    Aug 1, 2013
    Likes Received:
    If you want emergency reporting you can add a DALI Cloud gateway to your system.

    The DALI Cloud gateway is not a Clipsal product, but it designed to work seamlessly with Clipsal DALI.

    The DALI Cloud will listen to the DALI Line, when the Clipsal DALI Control software sends a request to run a duration test over the DALI Line, the DALI Cloud Gateway will start monitoring and taking emergency status and battery level check of the emergency light for the duration of the test.

    These values are uploaded and available on your web portal by logging in with your dalicloud user account. You can review logs and historical graphs of the emergency duration test as it depletes. If you are doing a large test it will automatically create AS2297 fire safety certificates for you to sign off on.
    jaied, Feb 28, 2014
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.