Solid Red Power Light

Discussion in 'C-Bus Automation Controllers' started by Weedo, Apr 24, 2022.

  1. Weedo

    Weedo

    Joined:
    Mar 21, 2011
    Messages:
    31
    Likes Received:
    3
    Location:
    Toowoomba
    Hi All,

    I've just had the shac that I use as a programming mule lock up with a solid red power light.
    I wasn't programming at the time but the unit was powered on.

    Anyone else experienced this problem?
    I have tried the hardware reset but it doesn't appear to be starting a reboot cycle.

    Any Ideas? feels like it might b

    Brent
     
    Weedo, Apr 24, 2022
    #1
  2. Weedo

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    The percentage of red light tells you how busy the processor is. If it's full red it means the processor is 100% busy. I suggest you have loaded a script that is just hard looping. You will probably need to factory reset it.
     
    Ashley, Apr 24, 2022
    #2
  3. Weedo

    Weedo

    Joined:
    Mar 21, 2011
    Messages:
    31
    Likes Received:
    3
    Location:
    Toowoomba
    Oddly I wasn't writing any code at the time of it changing.
    I have attempted to factory reset the device but no matter the duration I hold the button for the device reset never initiates.
    Is there any other tricks to the factory reset I'm not aware of?
     
    Weedo, Apr 25, 2022
    #3
  4. Weedo

    Ks04

    Joined:
    Dec 28, 2019
    Messages:
    107
    Likes Received:
    9
    Did you ever find a solution to this? Mine has done the same overnight - solid red power light, no status light - both the SW and HW reset buttons appear to have no impact.
     
    Ks04, Oct 23, 2023
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Flashing RED LEDs when a key is pressed.

  2. passive infra-red timer

  3. Infra Red codes

  4. DLT controlling volume from one button (was: DLT And Infra Red Codes)

  5. Senpill & infra red

  6. Lights on nobody home (Wiser UI not operating and iPhone app shows red network light)

  7. Shac power led flashing red

  8. MQTT - Looking for a solid guide to setup

Loading...