SLC5104TD5 Dimmer setup with Toolkit

Discussion in 'C-Bus Wired Hardware' started by Trevor, Nov 15, 2020.

  1. Trevor

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    298
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Hi All,
    I have a 4 channel dimmer that I am trying to setup with toolkit.
    I have added it to my list of connected modules and can turn the channels on/off with a Homegate project but i haven't been able to use the buttons on the dimmer to turn on/off the same Cbus address. Any info would help get me started i the right direction.

    regards
    Trevor
     
    Trevor, Nov 15, 2020
    #1
  2. Trevor

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    395
    Likes Received:
    37
    Location:
    Adelaide
    Hi Trevor
    The buttons on the front of the unit are only a manual override of the connected loads and will not turn on or off the C-Bus group address.
    Hence pushing the button on the front will not change the state in a Homegate project
     
    Wonkey, Nov 17, 2020
    #2
  3. Trevor

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    298
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Thanks for the info on that, explains why i couldn't do it.
    regards
    Trevor
     
    Trevor, Nov 17, 2020
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with setup...

  2. Toolkit Bug: Network setup

  3. Toolkit - Initial Network Setup

  4. How to setup a dimmer with timer

  5. Toolkit 1.3 Killed whole setup!!!!

  6. Need Help with Setup

  7. Help with basics of Cbus setup

  8. Cbus homebridge setup with rs232-ethernet interface

Loading...