Simple wizard help! ECGs in multiple groups

Discussion in 'DALI Software' started by Pickle96, Jul 12, 2020.

  1. Pickle96

    Pickle96

    Joined:
    Jul 12, 2020
    Messages:
    2
    Likes Received:
    0
    Hey everyone,

    Using simple wizard for the first time here and having some issues.

    Using DCDALCIP250-2 and 5502DAL to control Dali ECGs throught cbus.

    Simple wizard won't allow me to place an ECG into multiple groups? Is this a limitation of the software.

    Cheers in advance
     
    Pickle96, Jul 12, 2020
    #1
  2. Pickle96

    cramer

    Joined:
    May 5, 2005
    Messages:
    28
    Likes Received:
    1
    Location:
    Adelaide
    Hi Pickle,

    Yes, unfortunately Simple Wizard specifically implemented this limitation in order to 'simplify' things.

    I'm not 100% sure if things have changed but I believe you'd need a software USB license installer dongle and Clipsal's DCBM Wizard to continue using your current interface (DCDALCIP250-2).

    Alternately you could try using the DCDALCIP250-2 with Tridonic Master Configurator but from memory that software only works with Tridonic's own interfaces.

    Luckily you would be fine to use the Tridonic interface on the network while still using the DCDALCIP250-2 as a standalone power supply.

    Hope that helps.

    Cheers.
     
    cramer, Sep 4, 2020
    #2
    jboer likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Multiple groups

  2. Help with simple logic

  3. Controlling multiple groups easily without using a scene

  4. some help please with my 1st job some simple logic

  5. Dimmer Control of Multiple Groups Problem

  6. Help needed with simple coding

  7. DALI Simple Wizard 1.0 released

  8. DALI Simple Wizard 1.2 released

Loading...