Shutter relay operation

Discussion in 'General Discussion' started by Scoobalimalima, Jul 2, 2018.

  1. Scoobalimalima

    Scoobalimalima

    Joined:
    Jun 26, 2018
    Messages:
    17
    Likes Received:
    1
    G'day all.

    I have a question in regards to the operation of the shutter relays.

    Does the unit require two switches to operate open/close functions or can it be programmed to operate on one switch (one press for down but if you release then depress the switch again it goes back up), also do you have to hold the switch on for it to operate in either direction or is it just a momentary press? Most of mine will be through a DLT switch but would it work with just one normal switch also? I'm just trying to figure out how many individual switches I'll require for my installation.

    Cheers,

    Steve.
     
    Scoobalimalima, Jul 2, 2018
    #1
  2. Scoobalimalima

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    The shutter relay supports 1,2,or 3 button operation.

    In 1 button operation the button works in an open/stop/close/open/ etc sequence
    In 2 button operation one key is open/stop and one is close/stop
    In 3 button you have one key for each.

    The eDLT has dual action buttons (a left and a right) and a native shutter relay widget so one "key" gives you the 2 button operation.

    Nick
     
    NickD, Jul 2, 2018
    #2
  3. Scoobalimalima

    Scoobalimalima

    Joined:
    Jun 26, 2018
    Messages:
    17
    Likes Received:
    1
    Great, thanks for clearing that up for me.

    Cheers,

    Steve.
     
    Scoobalimalima, Jul 3, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. More Information about L5501RBCP C-Bus Motorized Blinds/Curtains/Shutter Relay

  2. Anyone installed the Shutter Control Relay yet?

  3. Using Using a Shutter Control Relay as a Change over Relay

  4. Shutter control without shutter relay.

  5. Relay in needs opposite operation

  6. DLT changes from shutter toggle to shutter open upon saving

  7. Difference between a shutter relay and change over relay

Loading...