Show temperature on eDLT

Discussion in 'General Discussion' started by ss1987, Oct 29, 2023.

  1. ss1987

    ss1987

    Joined:
    Apr 9, 2022
    Messages:
    24
    Likes Received:
    1
    Location:
    Melbourne
    Hi all,
    I've got a new CBUS network up and running at home and am doing some fine tuning.
    One thing I'm struggling with is getting the eDLTs to display the temperature of a 5031RDTSL sensor.
    I have a unique device ID but I've noticed there is also a channel number in the eDLT which needs to be set.
    The documentation doesn't specify what this refers to?

    Also, has anybody had an issue with the icons on an eDLT being incorrect? I have one which continues to show a fan icon even when I try and change it to something else like a lightbulb. Toolkit shows it has updated but the eDLT itself shows something different.
     
    ss1987, Oct 29, 2023
    #1
  2. ss1987

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    452
    Likes Received:
    46
    Location:
    Adelaide
    Try channel 0 or channel 1
    With regard to icon issue try doing a factory reset which is available at the bottom of the programming GUI make sure you are live on the network.
     
    Wonkey, Oct 31, 2023
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Who's going to the intelligent home show

  2. SENPIRSS (Learn Capable) does not show status

  3. CBUS Show room

  4. Melbourne Home show, what happened?

  5. Show User on Touch

  6. MRA Amplifiers show 'Burden Active'

  7. Show Temperature on Wiser

  8. eDLT Firmware Upgrade - Failed to detect an eDLT unit connected to the computer

Loading...