Shac power led flashing red

Discussion in 'C-Bus Automation Controllers' started by kojobomb, Sep 28, 2021.

  1. kojobomb

    kojobomb

    Joined:
    May 27, 2019
    Messages:
    71
    Likes Received:
    6
    Location:
    Possum Brush
    Ive searched the manual and the forums but beed to find the discription meaning for the front led status lights.
    My power led is alternating between green and red, i cant find any documentation and wanted to know what the red flashing means.
    Thank you
     
    kojobomb, Sep 28, 2021
    #1
    Graham Lamb likes this.
  2. kojobomb

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    It is in the documentation section 3.5.1

    It show the processor load as a ratio between the green and red duty cycle flashing. i.e. more red = more processor load.
     
    Ashley, Sep 29, 2021
    #2
    Graham Lamb likes this.
  3. kojobomb

    kojobomb

    Joined:
    May 27, 2019
    Messages:
    71
    Likes Received:
    6
    Location:
    Possum Brush
    thank you
     
    kojobomb, Sep 29, 2021
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Flashing RED LEDs when a key is pressed.

  2. passive infra-red timer

  3. Why the neo LED flashing

  4. LED's on mirror flashing

  5. GU 10 led lamps flashing when off

  6. Philips LED oyster fitting flashing when off

  7. C-bus led not illuminated on the control box but "unit" light is flashing

  8. Potential LED Dimming solution. Dali Gateway>Dali input LED Power Supply?

Loading...