setting unit #'s

Discussion in 'General Discussion' started by GibbyK, May 7, 2008.

  1. GibbyK

    GibbyK

    Joined:
    Mar 23, 2008
    Messages:
    8
    Likes Received:
    0
    Is there away to set the unit number for a pc interface with it looped to a dimmer mod with power supply. Oh yeah these are brand new, both with the same factory unit number.
     
    GibbyK, May 7, 2008
    #1
  2. GibbyK

    ICS-GS

    Joined:
    Nov 1, 2004
    Messages:
    347
    Likes Received:
    0
    Location:
    SE Melbourne
    in the first instance, you should probably enter learn mode (from the dimmer would be easiest), then connect to tool kit, and scan the network, it will then ask you to unravel... select yes... once complete you should be able to set to almost any unit # you wish.

    HTH

    Grant
     
    ICS-GS, May 7, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Motion Sensor Setting

  2. Setting up CNI

  3. Setting PCI Address using Toolkit

  4. Setting groups to the level of another group?

  5. Setting recall levels via C-Gate?

  6. Homesafe setting problem!

  7. homesafe setting problem! pls help

  8. Setting Recall Levels thru C-Gate

Loading...