Setting Group Address State

Discussion in 'C-Bus Automation Controllers' started by pspeirs, Apr 19, 2019.

  1. pspeirs

    pspeirs

    Joined:
    Nov 23, 2013
    Messages:
    185
    Likes Received:
    10
    Location:
    Sydney
    Hi All,

    I need some advice with the following.

    I have a reed on the garage door that I can detect open or closed. This goes into an input unit and sets a Group Address, lets call it "GARAGE DOOR REED".

    I control another group called "GARAGE DOOR TRIGGER" and have this visualized on the shac as a bell press style. This obviously doesn't show the door state.

    I would like to see the button show the door state, is this possible.


    Cheers,
    Paul
     
    pspeirs, Apr 19, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Setting PCI Address using Toolkit

  2. Setting groups to the level of another group?

  3. Group Address

  4. Group Address Character Restriction Please

  5. Setting Wiser CNI IP Address

  6. Deleting a group address

  7. Setting a Min/Max to a C-Bus Group

  8. Setting the IP address on the 5500CN

Loading...