SetCBusMeasurement(x,y,z,...) function

Discussion in 'C-Bus Automation Controllers' started by philthedill, May 16, 2020.

  1. philthedill

    philthedill

    Joined:
    Mar 21, 2010
    Messages:
    22
    Likes Received:
    0
    Location:
    Melbourne
    The SHAC has this inbuilt explanation for the SetCBusMeasurement function...
    "
    -- Set temperature and units of channel 1 of sensor 1 on the local network to 25.2 degC
    SetCBusMeasurement('Local', 'sensor1', 1, 25.2, 0) -- 0 is the units parameter as per chapter 28 of the C-Bus documentation"

    does anyone know what C-Bus documentation this is referring to? I am looking for the "units parameters" for kW and kWh and have been using trial and error (I am upto 40). Any ideas ? thanks
     
    philthedill, May 16, 2020
    #1
    1. Advertisements

  2. philthedill

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,060
    Likes Received:
    92
    Location:
    Adelaide, Australia
    1. Advertisements

  3. philthedill

    philthedill

    Joined:
    Mar 21, 2010
    Messages:
    22
    Likes Received:
    0
    Location:
    Melbourne
    thank you - very helpful
     
    philthedill, May 16, 2020
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.