Set groups on/off

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Dave Byron, Nov 4, 2004.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    when using the set groups on and off buttons it changes the state of the load on the first click but status doesnt reflect change- you have to click twice for the correct status to be shown


    dave
     
    Dave Byron, Nov 4, 2004
    #1
  2. Dave Byron

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Thanks Dave, alas you're not alone in reporting this.. it'll be fixed for release..
     
    Duncan, Nov 4, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Last Unit to Set

  2. Set time period in which to ramp on / off

  3. All groups switch off on one group ramp to zero

  4. Ramp down / Set off

  5. PIR Sensor turns off when light turns off

  6. Off ventilation in 5 minutes after light off

  7. ALL GROUPS OFF on 5032BNL

  8. BW Touch Screen turning off Groups

Loading...