SENPIRSS Wierdness

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Charlie Crackle, Oct 31, 2004.

  1. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I made the mistake of writing the entire database to the Network.

    All the occupancy sensors started playing up....

    I had the occupancy sensors set to

    Retrig Retrig ON key On key
    Idle Retrig Off key Off key
    Idle Retrig Retrig Idle
    Idle Retrig Off key Offkey

    For some reason the new software changes this to (when you edit)

    Retrig OnKey ON key On key
    Idle Retrig Off key Off key
    Idle Retrig Retrig Idle
    Idle Retrig Off key Offkey

    you can change it back to

    Retrig Retrig ON key On key
    Idle Retrig Off key Off key
    Idle Retrig Retrig Idle
    Idle Retrig Off key Offkey

    but it will not save it. you reopen and it is changed to

    Retrig Retrig ON key On key
    Idle Retrig Off key Off key
    Idle Retrig Retrig Idle
    Idle Retrig Off key Offkey

    even with the network off line, it will not save either.

    (PS the forum software stripped the spaces I had put in to make the tables clear.)
     
    Last edited by a moderator: Oct 31, 2004
    Charlie Crackle, Oct 31, 2004
    #1
  2. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I have noticed that the save does work to the network. Just not to the database.
     
    Charlie Crackle, Oct 31, 2004
    #2
  3. Charlie Crackle

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    Hi Charlie,

    Thanks, I've reproduced the bug.

    It actually does save to both the network and database correctly.

    We didn't think anyone would customise a SENPIRSS so we made it restore the default microfunctions whenever you loaded it in a dialog for editing. Obviously not too clever! That's now been fixed for the next release.

    Workaround in the meantime : Save your custom SENPIRSS functions as per normal. Resist the temptation to re-open the dialog. If you do, you'll have to reconfigure the functions before saving again.

    Cheers :)
     
    daniel, Oct 31, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SENPIRSS (Learn Capable) does not show status

  2. SENPIRSS Question (Firmware 1.2.67)

  3. SENPIRSS Saving Serial with New Toolkit

  4. LED Assignment on SENPIRSS Changes on its own

  5. SENPIRSS and Toolkit

  6. Expiring a timer in a switch/SENPIRSS from the logic engine

  7. Senpirss drop down box

  8. cbus cgate wierdness

Loading...