Send measurement values to RTI

Discussion in 'C-Bus Serial Protocols' started by ben addison, Sep 17, 2013.

  1. ben addison

    ben addison

    Joined:
    Aug 8, 2004
    Messages:
    62
    Likes Received:
    1
    Location:
    Sheffield
    HI,

    I am using RTI and Cbus on 2 site sites to control lighting and blinds. theu both work great.

    but what i can't do is get temp and current values from cbus into RTI via the CNI.

    Can any one help me out? as if this works then i have about 6 site that i can use it on.

    Ben
     
    ben addison, Sep 17, 2013
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Send Error More Info

  2. Measurement application values

  3. Logic for PAC module to send RS232 commands

  4. E-Mail Manager does not send email.

  5. Use CTouch to send HTTP Post Commands?

  6. Can wiser send an camera image via email

  7. Color c-touch color can read but not send out c-bus messages

  8. C-Gate Not Send Commands

Loading...