Security Zone Isolated Object

Discussion in 'C-Bus Automation Controllers' started by Josh, Nov 2, 2018.

  1. Josh

    Josh

    Joined:
    Aug 25, 2004
    Messages:
    240
    Likes Received:
    0
    Location:
    Pretoria, South Africa
    According to documentation, Zone isolated objects (0/208/20) indicate if a security zone is isolated(disabled).

    When I bypass a zone in Comfort, the object is immediately changed to true, but un-bypassing the same zone does not change the object back to false. Even looking at the logs from Toolkit shows that when un-bypassing a zone, a zone status (0/208/21) is sent instead.

    Any thoughts?
     
    Josh, Nov 2, 2018
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Gate object

  2. V3 and zone alarm

  3. C-Bus for Underfloor Heating Zone Control

  4. 8 Zone Alarm Panel & C-Bus

  5. Write system IO c-touch object

  6. Security App Zone name changes?

  7. Using Single Zone & 4 Zone Thermostats with Hydronic Heating...need help.

  8. Object Log help

Loading...