Schedules running after blackout

Discussion in 'Pascal Logic Code Examples' started by Trevor, Oct 18, 2021.

  1. Trevor

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    298
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Hi All,
    I have question about schedules.
    If there is a power outage during a running schedule and the touch screen resets, will the schedule continue as normal after power is restored, and if a schedule should have started but the power was off what happens to that schedule when the power comes back on?

    regards
    Trevor
     
    Trevor, Oct 18, 2021
    #1
  2. Trevor

    Graham Lamb

    Joined:
    Aug 3, 2004
    Messages:
    94
    Likes Received:
    12
    Location:
    Sydney, Australia
    Hi
    Schedules dont catch up. Schedules will run as they come up provided they are enabled if there is no enable address used schedules will run as normal after power up if you are using a enable address and GA On = enable you will need to turn it on via logic / advanced / Initialisation (ie; set GAxxx On.)
     
    Graham Lamb, Oct 18, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Schedules don't run on Ctouch

  2. C-Gate <-> PICED loses status after reconnect after 2hr timeout

  3. 'Running Schedules and Logic' displayed on C-Touch

  4. Schedules Are Not Running BY Wiser

  5. Enabling Wiser Schedules after trigger time

  6. Lost my network after power blackout

  7. Why fixed time schedules are being shifted after daylight saving kicks in ?

Loading...