Scenes and Bus couplers

Hi

I have a customer that wants traditional Brass switches, but wants the benefits of scene's

I'm sure i read somewhere of a way of getting Bus couplers to trigger scenes on a CTouch or other switch that has scenes stored ?



Thanks




Dean.

 

Couplers or Auxilary Input

You could use Bus Couplers 5102/4BCL to do the job but just remember the maximum cable length is 1mt between the switch and the bus coupler. Possibly a better idea would be to use 4 Channel Auxilary Inputs 5104AUX where the cable length is not such an issue but still needs to be considered.

Both units can be used as Application - Trigger Control to trigger scenes stored on the network.

Documentation on units here:

http://www3.clipsal.com/cis/lit_installinstructions_C-Bus2.php3

Bill

 

Thanks for the info Bill

Bus couplers should be ok as we can fit them in the back of 47mm deep boxes with the switches.



Dean.