SCENE PICED problems

hi
i made an installation wich consists of 40 devices.
It has a LCD pannel BW MK2 5000 with logic engine.
I made several scenes and they work well when turn them on from scene editor.
But if you upload them to LCD or use simulation mode works all of them in the same way. They whould turn all included loads on and off.

it seems the trigger all from one.
do you have any ideas to fix it?

 

Have you given all of the scenes different trigger group/action selectors?

 

having crefully read rogramming guide
i didn't understand promtly how sccene triggering works

all the scenes have unassigned aplication group trigger address as described below

 

You might need to send your project file to tech support along with a detailed description of the steps needed to make the problem happen.

 

do you have any other ideas?

 

I have never heard of anything like this happening.

You could use the C-Bus Diagnostic Utility to record the C-Bus messages and post those so we can see what is happening. You will need to provide a detailed description of what you did and when, along with what you expected to happen and what actually happened.

 

I hate to ask the obvious but how are you currently activating the scene?

I assume just by a button you have allocated in your piced project? If so are you sure you have set them to 'scene' function and selected different scenes for different buttons?

Cheers..