Scene controller LED

Discussion in 'C-Bus Toolkit and C-Gate Software' started by balmain1, May 8, 2005.

  1. balmain1

    balmain1

    Joined:
    Nov 9, 2004
    Messages:
    3
    Likes Received:
    0
    Location:
    Balmain East
    I want to set one LED on a Key 4 Scene Controller permanently ON... (for a few reasons - so I can see it in the dark, and to identify a key I have programmed as an "ALL OFF on exit" key)

    This is obvious in a KEY1, 2, or 4 input unit, but how is it done for a scene controller input unit?

    Any ideas?

    Thanks in advance...
    C
     
    balmain1, May 8, 2005
    #1
  2. balmain1

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I assume that you're referring to the 5034NS KEYSCEN4 product?

    Sorry, but there is no way to make it work as desired in the unit. The indicators remain On only whilst the key is being pressed.

    To achieve your desired behaviour you will need a Neo, Saturn or Reflection type key unit.
     
    Newman, May 8, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 5034NS Scene Controller & Tool Kit

  2. Scene control with a scene

  3. Scene Modify - Scene Toggle

  4. Old Cbus Scene Controller

  5. DLT LED's NOT FOLLOWING SCENE

  6. RGB LED Lights & 10v Analogue Controller

  7. NEO Status LED with L5501RFCP Fan Controller

Loading...