Saturn scene problem

Discussion in 'C-Bus Wired Hardware' started by Rolecgroup, Aug 3, 2004.

  1. Rolecgroup

    Rolecgroup

    Joined:
    Aug 3, 2004
    Messages:
    69
    Likes Received:
    0
    I have a Saturn switch that am unable to set scenes on.

    Works fine as dimmer/on/off control etc.

    When set as a scene relevent indicators come on on other switches, but dimmer just flashes all its LED's and nothing happens.

    I've changed switch back to on/off/unused and then back to scene but still doesnt work.

    Help appreciated.



    Dean.
     
    Rolecgroup, Aug 3, 2004
    #1
  2. Rolecgroup

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Try creating a blank unit in the database and downloading that to the unit. This will reset the unit configuration parameters back to factory defaults and correct any curruption of unit parameters (if by chance that is the problem).
    Then try and program your Scene again.
     
    Newman, Aug 3, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Saturn & Neo Scene Off

  2. Scene control with a scene

  3. Naming a scene on a Saturn DLT??

  4. Scene Modify - Scene Toggle

  5. master scene switch controlling other scene switches

  6. Why cannot paste scene in specify sence line in "Scene Manager" window

  7. Scene Toggle Saturn and DLT

  8. Saturn switches and Saturn dlt switches

Loading...