Saturn Glass Front

Hi,

I'm quite new to c-bus and am just in the completion stages of two projects.
Both use the US/AUS version of the Saturn Glass front DLT's.

The DLT's have been in loose situ for a while, until the decorating is finished.
I've recently started to try and fit the front glass??

The top slots in nicely, but thats it, the two bottom clips just dont (clip that is). I've checked and rechecked the destructions and just cant get them to clip?

Ive used the UK versions previously and these had a kind of post retained by an 'o' ring to fix the glass - these worked great.

Am I going wrong somewhere? - I've even tried assembling off the wall and they still dont clip?? I have 15 of these on the one project, and I talked the customer into them?!?!

As you can tell I'm having trouble with me clip!

Also, a bit off topic - I'm waiting on a delivery of E5031RDTSLWE, they've been over six months. Are you aware of any delays?

TIA, Aaron

 

hi ,
have had the same problem ,sometimes due to to much glue on the lcd ,and sometimes due to the plaster work not being to good.

cheers

conor

 

Check this thread

http://www.cbusforums.com/forums/showthread.php?t=5602&highlight=DLT+sheetrock

Basically the plaster is uneven.

 

Also E5031RDTSLWE

Thanks for the replies.

I've even tried assembling off the wall - so no chance of warping the back plate and they just wont clip.

I'll try some other switches and let you know how it goes

Any feedback on the delivery of E5031RDTSLWE ???????