'Running Schedules and Logic' displayed on C-Touch

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by KevinH, Aug 13, 2011.

  1. KevinH

    KevinH

    Joined:
    Aug 3, 2004
    Messages:
    171
    Likes Received:
    0
    Location:
    Yorkshire. UK
    My colour touch has been running fine for many months but just recently it's started popping up a dialog that says 'Running Schedules and Logic', it started appearing for about 15 seconds and then disppearing but now it appears for a good 30 minutes or so . It is displayed progressively longer each time it shows.

    What could be causing this ? I haven't chnaged anything although I have added a couple of C-Bus devices (4 zone thermostat and Comfort) - any ideas ?

    K
     
    Last edited by a moderator: Aug 13, 2011
    KevinH, Aug 13, 2011
    #1
  2. KevinH

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    This is probably the Schedule Catch-up process which occurs when the time changes. See the help file topic "Schedule Catch-up" for details.

    Enable the Colour C-Touch log, including "info" messages. Take note of when you see this occur, then have a look in the log at that time to see what caused it. It may be that some device on C-Bus is sending rogue time messages for some reason.
     
    Darren, Aug 14, 2011
    #2
  3. KevinH

    KevinH

    Joined:
    Aug 3, 2004
    Messages:
    171
    Likes Received:
    0
    Location:
    Yorkshire. UK
    Ahh - very likely. I think I've seen on this forum some issues with Comfort and the time application. I know it participates in it. I'll have a read now I know what I'm looking for.

    K
     
    KevinH, Aug 14, 2011
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.