RS232 Pins

Discussion in 'General Discussion' started by littleyid, Feb 28, 2007.

  1. littleyid

    littleyid

    Joined:
    Jan 23, 2007
    Messages:
    4
    Likes Received:
    0
    Please could someone tell me which pins are TX and RX

    Thanks
     
    littleyid, Feb 28, 2007
    #1
  2. littleyid

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    tobex, Feb 28, 2007
    #2
  3. littleyid

    littleyid

    Joined:
    Jan 23, 2007
    Messages:
    4
    Likes Received:
    0
    Thanks

    Thanks for that link.

    However I need to know how the pins are set up for clipsal as the piece of equipment that i'm trying to connect to has TX on pins 2 and RX on pin 3 and I'm trying to see if I need to use a straight thruogh cable or a null modem cable??

    Any ideas??
     
    littleyid, Mar 3, 2007
    #3
  4. littleyid

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    Pin outs

    littleyid,
    have a look at the installation instructions for the PAC and PCI.
    These are available through the CIS website (www.clipsal.com/cis). You will find the info you need there.

    Mark
     
    Mr Mark, Mar 4, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. RS232/RJ45 Port on the PCI

  2. Usb - Rs232

  3. RS232 to Ethernet adapters

  4. Telephone Interface (CBTI) RS232 as PCI

  5. PAC instead of standard RS232 ?

  6. Rs232 confusion. press a button sends rs232

  7. To RS232 or not to RS232?

  8. PACA rs232 vs 5500PC rs232

Loading...