Rs232 confusion. press a button sends rs232

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Fliposide, May 12, 2008.

  1. Fliposide

    Fliposide

    Joined:
    Jan 21, 2008
    Messages:
    8
    Likes Received:
    0
    Hi all,
    I've looked through the forum and can't seem to find how to do this (sorry newbie)

    All I need to know is when I press a wall switch (Saturn or a normal push switch) it then sends a RS232 (hex) code to a PC running a lighting control program.

    I got the C-bus system working with just the packs etc and have a PICED module in the mix to to do the RS232 (so I was told...)

    Any hint or line of code would be great :)

    Flip.
     
    Fliposide, May 12, 2008
    #1
  2. Fliposide

    filpee

    Joined:
    May 31, 2006
    Messages:
    204
    Likes Received:
    0
    Location:
    Western Australia
    There are plenty of Examples installed with PICED.

    Have a look at

    Code:
    C:\Clipsal\PICED\Projects\Examples\Logic\Serial Test
     
    filpee, May 12, 2008
    #2
  3. Fliposide

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    The logic help file also has information. See the topic "Serial IO Examples" for lots of information about using serial.
     
    Darren, May 13, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Unit Numbering Confusion?

  2. Assign Serial RS232 Logic to a CTouch Software Button?

  3. C Touch sends spurious outputs to C Bus

  4. eDLT and Short Press Toggle with Long Press Start Timer

  5. GI unit displays one value and sends another

  6. EDLT 1 button bell press with 2 groups

  7. Override Modules through a button press?

  8. Button press with a dependency

Loading...