Remote Networks

Discussion in 'C-Bus Automation Controllers' started by jboer, Nov 10, 2018.

  1. jboer

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Hi All,

    Just have a site where we are starting to replace the dying CTCs with the SHACs. A number of them need to talk to remote networks (wireless links, central control ect).

    2 questions: Can the SHAC connect/tunnel to remote networks? If so is there a limit like the CTCs of 15 or so networks?

    Cheers
     
    jboer, Nov 10, 2018
    #1
  2. jboer

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    Yes, it supports 20 networks.
     
    NickD, Nov 12, 2018
    #2
    jboer likes this.
  3. jboer

    Marine Boy

    Joined:
    May 17, 2018
    Messages:
    14
    Likes Received:
    0
    I am curious with how the remote networks function.

    For example, use the same Application Address (56) and Group Address (say 66) on multiple remote networks and the SHAC/NAC correctly receives GA status from a remote network and sends GA commands to the remote network.

    Does it work for a radial network structure (3-4 networks in series)?
     
    Marine Boy, Nov 18, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBus2 components in Old CBus1 networks

  2. Article Discussion Searching for C-Bus Networks

  3. C-Gate 2 over 3 Networks

  4. Toolkit 1.1.4 breaks wireless networks when transfer from database

  5. New HomeGate, multiple networks??

  6. Using Wireless remote with wired networks

  7. Synchronising Remote Networks

Loading...