Relay in needs opposite operation

Please find hereunder the detailed description of the function the customer need

1. The customer is an LCD monitor?s seller and there are spot lights above each display.
2. There is a light reflection on these monitor.
3. The customer needs to switch OFF the light when the salesman and the client stands in front of the display, in order to avoid the light reflection on the screen.
4. When they leave from the place, the light must be switched ON again.

I tried by changing the expiry function of the sensor to recall 1 and give recall1 as 100% and recal2 as 0%. It does not work. how can i Achive this function with 5753L and L5512RVF without using logic engine?


with thanks

Hashim

 

You're part way there. Changing the timer expiry function to Recall 1 and setting the Recall 1 level to 100% is the first half of the solution.

The second half is to change the configuration of the Virtual key so that it turns the group off and on when you want. This is done on the Functions tab in Toolkit.

• Change the Short Press function of the ML key from Retrigger Timer to Start.
• Change the Short Press function of the MD key from On key to Off Key
• Change the Short Release and Long Press functions of the MD key from Retrigger Timer to Start.

When the motion detector senses movement it will send the Off command on the Group address and then start the timer. When the timer expires, it will issue the Recall 1 command of 100%, which will turn the group address back on again.