Reading Temp From A Monitor

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by xrmichael, Feb 7, 2008.

  1. xrmichael

    xrmichael

    Joined:
    Nov 20, 2006
    Messages:
    113
    Likes Received:
    1
    Location:
    uk
    I have a 5031TS on our system that is 10degs out of calibration, (i know i could alter th internal pot buts its a pain to get to the device). Reading the help file it states 'A monitor is used to received data from a component this can be use by Logic'. I dint seem to see a logic command to get this data.

    I intend to get the value and remove 10degs from it and redisplay it and the correct level.

    Cheers.
     
    xrmichael, Feb 7, 2008
    #1
  2. xrmichael

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    See the logic help file topic "GetUnitParameter Function"
     
    Darren, Feb 7, 2008
    #2
  3. xrmichael

    xrmichael

    Joined:
    Nov 20, 2006
    Messages:
    113
    Likes Received:
    1
    Location:
    uk
    Monitor

    Thanks, if found it after a bit more reading. Is it normal that the units are way out of calibration ?
     
    xrmichael, Feb 8, 2008
    #3
  4. xrmichael

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,392
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    No. Sometimes they can drift a bit tho. :(
     
    ashleigh, Feb 8, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Load monitor

  2. Reading temperature from 5031TS series sensor

  3. Problem reading from General Input 0-1Volt range

  4. C-touch Reading text files from disk.

  5. Reading the BOM data from web page

  6. reading L550aux status from other network

  7. Reading information over network from a Schneider meter?

  8. 5104DTSI temp unit found but not reading

Loading...