reading L550aux status from other network

Discussion in 'C-Bus Wired Hardware' started by zip_cool, Mar 31, 2010.

  1. zip_cool

    zip_cool

    Joined:
    Sep 14, 2006
    Messages:
    80
    Likes Received:
    0
    hello all, can anyone tell me how to get L5504Aux data from other network?

    what i one to this is get the status of the L5504aux modules in network 1,2,3,4,5 & 6 into a monochrome touch screen that connect in network 3

    thanks


    Regards
     
    zip_cool, Mar 31, 2010
    #1
  2. zip_cool

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    1. Make sure the groups used don't conflict.

    2. Set the bridges to "forward to adjacent network".
     
    ashleigh, Mar 31, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus control from other software

  2. Reading temperature from 5031TS series sensor

  3. Problem reading from General Input 0-1Volt range

  4. Reading Temp From A Monitor

  5. C-touch Reading text files from disk.

  6. Reading Security status via CGate?

  7. Other systems to control C-bus other than Wiser

  8. Reading information over network from a Schneider meter?

Loading...