Question

Discussion in 'General Discussion' started by Ben Versang, Jun 15, 2008.

  1. Ben Versang

    Ben Versang

    Joined:
    Jun 13, 2008
    Messages:
    1
    Likes Received:
    0
    Hi,

    I have just finished programming a house but I am left with 2 problems.

    When I turn on a particualr light in a bedroom, one light in the kitchen looses intensity for about 2 secs and then return to normal.

    The two lights aren't on the same dimmer (first one is on relay and the second is on dimmer).

    I haven't found any connections between the two (scene, logic...).

    Any idea someone?

    Thanks advance
    Ben
     
    Ben Versang, Jun 15, 2008
    #1
  2. Ben Versang

    amberelectrics

    Joined:
    Aug 29, 2007
    Messages:
    114
    Likes Received:
    0
    Sounds electrical rather than logical to me. Can you let us know the loads on the dimmers?

    Also check your neutral connections, especially if they are all on the same commoning bar, could be a loose wire or undersize neutral strap.
     
    amberelectrics, Jun 16, 2008
    #2
  3. Ben Versang

    inpowers

    Joined:
    Jul 1, 2007
    Messages:
    44
    Likes Received:
    0
    Location:
    Sydney
    What kind of light is it Low Voltage OR Incandescent Flouro.
    also does it only do it one one bed room switch or all the bedrooms

    Rob
     
    inpowers, Jun 16, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Coding Question

  2. Another coding Question

  3. Newbie question (Startserve Pro)

  4. Phantom groups question

  5. very simple c-gate question re ports

  6. Timer delay off (Now that's a newbie question)

  7. Serverx Question

  8. 5500PC question and Saturn switch question

Loading...