Push control of Sonos

allenperry · 2021-12-22

My Sonos module which worked fine for 5 years operating the lounge room soundbar (volume & mute buttons) with a Push TV GUI, has stopped working. The Sonos device (Playbar) MAC address has not changed and it was previously Zone 1. When I added a new speaker to my Sonos network, Zone 1 became speakers in the garden, not the Playbar. I've tried all Zone numbers from 0 to 9 and the only one that works is Zone 1 and that is not the correct speakers anymore. Anyone know how Sonos Zone numbers are allocated / assigned / picked up in Push?

Discussion in 'Push Controls' started by allenperry, Dec 22, 2021.

allenperry

Joined:

Nov 18, 2016

Messages:

1

Likes Received:

0

Location:

Mossman QLD

My Sonos module which worked fine for 5 years operating the lounge room soundbar (volume & mute buttons) with a Push TV GUI, has stopped working. The Sonos device (Playbar) MAC address has not changed and it was previously Zone 1. When I added a new speaker to my Sonos network, Zone 1 became speakers in the garden, not the Playbar. I've tried all Zone numbers from 0 to 9 and the only one that works is Zone 1 and that is not the correct speakers anymore. Anyone know how Sonos Zone numbers are allocated / assigned / picked up in Push?

allenperry, Dec 22, 2021

#1

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Welcome to the C-Bus Forums!

Welcome to the C-Bus Forums, for help and advice with Clipsal/Schneider C-Bus devices. From time to time you will see Clipsal staff on the forums, but this is not an official support channel.

Please join our friendly community by clicking the button below - it only takes a few seconds and is totally free. You'll be able to ask questions about your C-Bus products or chat with the community and help others. Ask a Question