Pulsed use in a scene

Hi all,

I am assuming there is a simple way to achieve what I want below but I am struggling to think how. I have a sensor input unit plugged into a front door keypad and I want to use it to trigger the opening of the doors. I have it working fine for one door and it pulses for the 15 secs I need it to open for, however, I cannot work out how to make it do the same for two doors.

I would like it to pulse one ELV contact for 15 sec (Gate) and another for 60 secs (front door), however, I can only pulse one contact in the Sensor area and if I setup a scene it does not allow pulses.

Any help appreciated.

Glen

 

What is the sensor input unit you are using? If it is a bus coupler you should be able to use the blocks tab to get two different pulse times.

Alternatively, if you have a touchscreen/wiser/pac you can create scenes in those that support pulsing.

 

Thanks Ashley, blocks did it,

Cheers