Programming relay vs dimmer

Discussion in 'C-Bus Toolkit and C-Gate Software' started by countach, Jun 8, 2007.

  1. countach

    countach

    Joined:
    Dec 22, 2005
    Messages:
    49
    Likes Received:
    0
    I have in my house some 8 channel dimmers and one 8 channel relay. I can telnet to cgate software and control the dimmer channels with "off <group-name>" command.

    However, when I do the same with lights that are connected to the relay I get the message:
    off group1
    408 Operation failed: //HOME/254/56/21

    Can someone enlighten me?
     
    countach, Jun 8, 2007
    #1
  2. countach

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    Can you try the following commands and let me know the result:

    project load HOME
    project use HOME
    dbget 254/56/21
    lighting on 254/56/21
    </group-name>
     
    Richo, Jun 10, 2007
    #2
  3. countach

    countach

    Joined:
    Dec 22, 2005
    Messages:
    49
    Likes Received:
    0
    Hmm, I rebooted the CNI from the web interface, and now it seems to work. I will keep monitoring it.
     
    Last edited by a moderator: Jun 11, 2007
    countach, Jun 10, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is It a relay or dimmer

  2. Relay vs Dimmer

  3. Relay/Dimmer fuse protection...

  4. Din relay/dimmer loudness

  5. Using Using a Shutter Control Relay as a Change over Relay

  6. Metal Halids Run Off Dimmer as Substitute Relay?

  7. Power into CBUS Relay/Dimmer

  8. Difference between a shutter relay and change over relay

Loading...