Programming Cbus Wireless with 5100PC

Discussion in 'C-Bus Wireless Hardware' started by jago, May 3, 2007.

  1. jago

    jago

    Joined:
    Mar 21, 2007
    Messages:
    11
    Likes Received:
    0
    Can you program Cbus Wireless switches and plug adapters OK using 5100PC and Dontronics USB adapter?

    Thanks....
    Damien.
     
    jago, May 3, 2007
    #1
  2. jago

    PSC

    Joined:
    Aug 3, 2004
    Messages:
    626
    Likes Received:
    0
    Location:
    Brisbane, Australia
    You will need a wireless gateway.
     
    PSC, May 3, 2007
    #2
  3. jago

    build

    Joined:
    Nov 17, 2006
    Messages:
    24
    Likes Received:
    0
    G'day Damien,
    It will depend on the firmware apparently. What version of the clipsal software are you using?

    I have a 5100PC with version 2.00d firmware and no wireless products are listed, so unless clipsal allow the firmware to be flashed, the short answer would be no.

    Might be easier if you follow this thread over the next few days.
    http://www.cbusforums.com/forums/showthread.php?t=3305

    (as Sgt Schultz said "I know nothhhiiiggg"
    cheers,
    build
     
    build, May 4, 2007
    #3
  4. jago

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    You need a wireless gateway.

    You also need to ensure that the firmware in your 5100PC is version 3 or later.

    Earlier versions may not work. If you find you have an earlier version please PM me.
     
    ashleigh, May 23, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.