Problems with interference

Discussion in 'C-Bus Wireless Hardware' started by Shrike, Feb 23, 2012.

  1. Shrike

    Shrike

    Joined:
    Feb 23, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    Moscow
    Hello!

    I have one problem. Saturn Wireless 4 button switch work sometimes well, but sometimes command from button lost in a air :(. Wire C-Bus Suturn switch simly repeat if command was lost. How to make wireless switch also continue to send command up to moment when gate will recieve it?

    Thanks for advice!
     
    Shrike, Feb 23, 2012
    #1
  2. Shrike

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    C-Bus Wireless devices will repeatedly send the message in the background if they do not receive an acknowledge from the receiving devices. This suggests that you have a source of interference in your installation, or that the devices are too far apart. Have you changed anything recently, like a different wireless router, wireless camera or cordless headphones?

    There is an option that may help you. On the Global tab of the Toolkit UI for wireless devices is an option called Repeat Transmissions. Is this turned on?
     
    Newman, Feb 23, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.