Problem with C-Touch display after configuration download

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Gerg, Apr 26, 2005.

  1. Gerg

    Gerg

    Joined:
    Sep 13, 2004
    Messages:
    3
    Likes Received:
    0
    Location:
    Perth
    I recently downloaded a new configuration to my C-Touch unit and when the unit restarted, the text on all screens, including the Clipsal ones at the start, is unreadable.
    I thought the firmware may have been corrupted, so I reinstalled it (V1.9), but to no avail.
    I don't know whether the problem is hardware, software or what, but I would appreciate any advice available.
     
    Gerg, Apr 26, 2005
    #1
  2. Gerg

    Rolecgroup

    Joined:
    Aug 3, 2004
    Messages:
    69
    Likes Received:
    0
    Not due to Font smoothing is it ?
     
    Rolecgroup, Apr 26, 2005
    #2
  3. Gerg

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    This is the most likely cause. See the FAQ for details on how to fix it.
     
    Darren, Apr 27, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.