problem in tunr on/off in the diimer chanels..

Discussion in 'General Discussion' started by madhawa.weerasooriya, Sep 16, 2009.

  1. madhawa.weerasooriya

    madhawa.weerasooriya

    Joined:
    Sep 16, 2009
    Messages:
    27
    Likes Received:
    0
    Location:
    srilanka
    Hi all,

    We had a problem in Cbus system that was installed in auditorium.
    Problem is occured when turn on the halogen lights which had connected to the dimmers are start to blink(fluctuate)severel times before it comes to 100%
    It seems like a panic mode situation as i would say to give you more introduction.

    Does this can be occure due to over loading the dimmer chanels??

    Or any other reason for this thing...?

    Appreciate if any profesional can help on this..

    Regards..
    Madhawa
     
    madhawa.weerasooriya, Sep 16, 2009
    #1
  2. madhawa.weerasooriya

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Can you please provide some more information?

    Which C-Bus dimmer are you using?
    Which brand / what type of transformers are used with the halogen lights? Are they electronic or iron core ballasts?
    How many transformers and lamps are connected to the channels that are causing the problem?
     
    Newman, Sep 17, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Interfacing the PC to the 5500PC problem

  2. Toolkit: Love the "Group Edit" ON/OFF buttons!

  3. Off the grid

  4. Lights off in the morning.

  5. PIR Sensor turns off when light turns off

  6. Off the Grid

  7. Off ventilation in 5 minutes after light off

  8. The USB Port at the front of the MRA Matrix Switch

Loading...