Pro series Dimmers and Toolkit

Discussion in 'General Discussion' started by Nick Mullins, Jul 14, 2005.

  1. Nick Mullins

    Nick Mullins

    Joined:
    Aug 3, 2004
    Messages:
    51
    Likes Received:
    0
    Gday guys,
    I am commisioning a Pro series Dimmer project at the moment.I Have noticed that toolkit has lost the capabilty to look at channels actual load current like in V2.Is the Channel Status Monitoring Something that we are likely to get back in future releases ?.Other than that Toolkit is great !. It was actually a bit unpleasant to go back to V2 to do some load checks.As soon as CIRCA is toolkit compataible we can put V2 to the back of our minds. :)
     
    Nick Mullins, Jul 14, 2005
    #1
  2. Nick Mullins

    Ross

    Joined:
    Aug 3, 2004
    Messages:
    174
    Likes Received:
    0
    Some of us can. Others have legacy jobs that wil still require V2 for many, many years to come. ;)
     
    Ross, Jul 14, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pro Series Dimmers Help

  2. Pro series dimmers and Philips EHC 350 TX

  3. Pro series dimmers and DMX

  4. L5104D Pro series Dimmers - emergency lighting?

  5. Pro Series Dimmers (again)

  6. Pro Series Dimming

  7. Pro Series Dimmer Loads Flickering

  8. Trailing Edge Pro Series

Loading...