Pool Control via 5080CTC

Discussion in 'C-Bus Wired Hardware' started by Energration, Dec 1, 2006.

  1. Energration

    Energration

    Joined:
    Jan 13, 2005
    Messages:
    2
    Likes Received:
    0
    Location:
    Albury
    Is there anyone out there who has used C-Bus and either a genaeral input module or analogue input for the control of solar pool heating control I have an application where the customer wants to be able to set and adjust the pool water temp and view the roof water temp and the actual pool water temp.
    I was thinking of connecting the 2 thermostats to an analogue input module and writing logic to allow me all the appropriate control and would appreciate input from anyone who may have already done this or something similar :rolleyes:
     
    Energration, Dec 1, 2006
    #1
  2. Energration

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    I dont know much about this stuff or how far into it you are, but I cam across this pool/spa controller that has a c-bus interface

    http://www.aqualine.com.au/cont.htm

    All I know about them is what I read on their web page. Maybe there is something there that will work for you

    Mick
     
    znelbok, Dec 2, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.