Pin Code Removal

Discussion in 'C-Bus Automation Controllers' started by Weedo, Apr 1, 2020.

  1. Weedo

    Weedo

    Joined:
    Mar 21, 2011
    Messages:
    30
    Likes Received:
    3
    Location:
    Toowoomba
    Hi all,

    I've come across an issue with the page structure pin code setting.

    I have a page on a NAC that once required a pin for authentication but no longer needs this.
    I have removed the pin from the prompt window but the page continues to show the keypad for pin input.
    I have looked into editing the .tar and the old password is still in the export file. it appears the issue is that part of the data file is not correctly removed/edited once the pin is removed?

    any ideas?

    Thanks
    Brent
     
    Weedo, Apr 1, 2020
    #1
  2. Weedo

    Weedo

    Joined:
    Mar 21, 2011
    Messages:
    30
    Likes Received:
    3
    Location:
    Toowoomba
    UPDATE:
    As with all things the moment you ask the question the answer presents itself.
    I discovered I had also included a separate password under the Second Level tab which applies another password to the whole group of pages.
    I will leave this here in the case someone else has this difficulty.

    Brent
     
    Weedo, Apr 1, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.