PICED project file?

Discussion in 'C-Bus Wiser 2 Controller' started by bn1980, Apr 17, 2022.

  1. bn1980

    bn1980

    Joined:
    Apr 11, 2022
    Messages:
    10
    Likes Received:
    0
    Is the PICED project file the same as the CBUS Toolkit project file?

    Can a PICED project file be generated from an existing setup?
     
    bn1980, Apr 17, 2022
    #1
  2. bn1980

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    386
    Likes Received:
    37
    Location:
    Adelaide
    in simple terms C-Bus project file defines the unit address and programs the functionality of the majority of devices.
    Some C-Bus equipment uses PICED (Programming Interface for C-bus Embedded Devices)
    this includes the touch screens, Wisers PAC
    To use PICED successfully you need a C-Bus project created in Toolkit first
    You can retrieve a project from a wiser, but first I would suggest ensuring that you have a toolkit project.
    This can also be retrieved from the network by scanning and transferring to the database.
    However you will not have any group address Tag names, You can rename the default name which is just representative of the group address numbers and change them to give meaningful names.
    Having meaningful name makes the whole process much easier.
     
    Wonkey, Apr 20, 2022
    #2
    Ashley W likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.