Piced Not Connecting to C-Bus

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Dave Byron, Jul 7, 2010.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    I am trying to test Piced by connecting to a dummy C-Bus network on my desk, it fails to open.

    On the real project network there is a CNI for Toolkit connect, and Toolkit has it set as the connection type, all works well.

    Problem now is on my test setup I have gone back to using a PCI connection and hence Piced will not connect, so how do I set Priced to connect via a PCI not the CNI.

    Tried turning all things on and off in the ?network manager? but can not set to PCI, the only way around is goto Toolkit and change there.
    pic is what i need

    dave
     

    Attached Files:

    Last edited by a moderator: Jul 7, 2010
    Dave Byron, Jul 7, 2010
    #1
  2. Dave Byron

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    PICED (and HomeGate and Schedule Plus) do not get involved with setting up C-Bus network details in any way. That is the job of ToolKit, so you will need to use ToolKit to make these changes.
     
    Darren, Jul 8, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Connecting HomeSafe to C-Bus

  2. Colour touch not connecting to c-bus

  3. Connecting to C-Bus through PCI

  4. Connecting to the Network through PICED...and Schedule Plus

  5. Wiser not connecting after ip change

  6. wiser not connecting to c bus

  7. PICED and C-Gate not connecting

  8. DLT not connecting to toolkit

Loading...