Piced Daylight Saving

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Dave Byron, Nov 8, 2011.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    I have a home with 5 C-Touchs but the time does not show daylight saving time on the unit (in Piced its ok), were should I look for this one ???

    GetBoolIBSystemIO("Daylight Savings") = false
    Maybe the date in unit is wrong - better check that.

    Darren - Also note that Piced shows the wrong year for finish time.

    Dave
     

    Attached Files:

    Last edited by a moderator: Nov 8, 2011
    Dave Byron, Nov 8, 2011
    #1
  2. Dave Byron

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    For Black and White C-Touch or C-Touch Spectrum, you can set the Daylight Savings setting on the time setting tools page. On Colour C-Touch, it is fully automatic.

    If this is definitely giving the wrong value (compared with the state shown on the time page), let me know.

    Issue 22371
     
    Darren, Nov 9, 2011
    #2
  3. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    To Fix I turned off the "master unit" box in all units except one then
    rebooted the one that was master and fixed it.

    Dave
     
    Dave Byron, Nov 10, 2011
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Piced Template saving

  2. Saving from PICED

  3. Daylight Saving time

  4. NZ Daylight Savings Crisis!

  5. Mini-Y2K fears over daylight saving change

  6. Is Daylight Saving On ???

  7. Colour C Touch daylight saving

Loading...