PICED 4.9 Wiser 1.20

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by constantcharge, Aug 5, 2010.

  1. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Having some problems with new wiser fw and PICED 4.9.

    Updated wiser firmware to 1.20 OK.
    Then tried to download the project (made some minor change to a label)
    It failed to authorise with wiser and socket timed out.
    Tried multiple time same with the same result. Cycle wiser power in-between attemps. no change.
    Factory reset the wiser. still no change.

    Downgraded to piced 4.8.4 and 1.17 fw and everything works fine....
    2nd wiser I have had issues with now.

    Funny my test one does not seems to have the same probelm.....
     
    constantcharge, Aug 5, 2010
    #1
  2. constantcharge

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    There is a defect in 1.20 Wiser firmware which had problems transferring *just the project* when the project filename is 4 characters or less (or maybe it was less than 4 characters.. I'm not sure).

    Is it possible this is your problem?

    If so you can work around it by transferring firmware and project together, or changing the name of your project.

    Nick
     
    Last edited by a moderator: Aug 5, 2010
    NickD, Aug 5, 2010
    #2
  3. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Yep that would be the issue. Was 3 characters.

    Cheers Nick.
     
    constantcharge, Aug 5, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.