Peirl Sensitivity settings

Discussion in 'General Discussion' started by dodge1, May 26, 2012.

  1. dodge1

    dodge1

    Joined:
    Oct 12, 2009
    Messages:
    23
    Likes Received:
    0
    Location:
    Colorado
    I have not found in the documentation if the function of Pot A and Pot B on the global tab are set to unused what the effect is. Does this default settings to max sensitivity? I have an installation that we do not want the end user to have the ability to adjust the trim screws under the cap.
     
    dodge1, May 26, 2012
    #1
  2. dodge1

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    When Pot A and Pot B are disabled the sensitivity of the PEIRL is 1 step below the maximum. I'd expect you to see no practical difference between the pot set to maximum and the Pot disabled.
     
    Newman, May 28, 2012
    #2
  3. dodge1

    dodge1

    Joined:
    Oct 12, 2009
    Messages:
    23
    Likes Received:
    0
    Location:
    Colorado
    Thanks Newman. I tried the help files and all documentation I could find here in the states but no luck so thought I would try here. We are learning here in the US but sometimes the documentation is lacking in the US. Thanks much.
     
    Last edited by a moderator: May 29, 2012
    dodge1, May 29, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PIR sensitivity

  2. PEIRL Pulsing Group for Light Control - Override Problem

  3. PEIRL as PE and PIR

  4. 5753 PEIRL Blue Light?

  5. 5031NIR Sensitivity

  6. PIR Setup/Sensitivity

  7. 5753 PEIRL & Schedule Plus

  8. 5753 Multi Sensor - Sensitivity issue

Loading...