PACA User Indicator

Discussion in 'C-Bus Wired Hardware' started by filpee, Mar 20, 2007.

  1. filpee

    filpee

    Joined:
    May 31, 2006
    Messages:
    204
    Likes Received:
    0
    Location:
    Western Australia
    What is the 'User Indicator' on the PACA actually used for?
    Can it be controlled from the logic engine? if so how?

    Thanks guys
    Phil
     
    filpee, Mar 20, 2007
    #1
  2. filpee

    cramer

    Joined:
    May 5, 2005
    Messages:
    28
    Likes Received:
    1
    Location:
    Adelaide
    Help File

    Look up LED in the logic engine help file.

    This shows you how to use it in the logic engine.

    As for it's purpose, I believe it's used to indictate whatever you want it to, from indicating the state of a particular load, or you want it to come on only when it's Tuesday.

    It's just like turning a light on or off with the logic engine.
     
    cramer, Mar 20, 2007
    #2
  3. filpee

    filpee

    Joined:
    May 31, 2006
    Messages:
    204
    Likes Received:
    0
    Location:
    Western Australia
    Haha awsome. Yea I wanted to use to help in debugging. I searched the manual for 'indicator' and it turned up nothing.
    Searching for LED showed exactly what I was after. thanks.
     
    filpee, Mar 20, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Triggering PACA from C-Gate

  2. PACA and Light Level Sensor

  3. Using PACA to poll unit values

  4. PACA upload turns outputs off

  5. PACA controller potentials

  6. Disable PACA while Schedule Plus is running

  7. Paca

  8. PACA 2-way communication with Daikin VRV over serial

Loading...