PAC - Is there any way to share it over TCP ?

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by phcjpp, Nov 7, 2005.

  1. phcjpp

    phcjpp

    Joined:
    Oct 19, 2004
    Messages:
    112
    Likes Received:
    0
    Location:
    London
    I want to allow my pac to be programmed externally - is there any way to do that. My cgate is shared externally through my firewall and that works well. Was thinking a port redirector or something?

    Thanks
    Chris
     
    phcjpp, Nov 7, 2005
    #1
  2. phcjpp

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    Someone mentioned they were using a USB to TCP/IP convertor with the PAC successfully in a recent thread ... the thread on stopping the PAC module execution if I recall correctly.
     
    Richo, Nov 7, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is there a way to have a non retriggerable timer.

  2. Tcp/ip

  3. Are there any plans for a....

  4. Is there any product documentation for CBUS thermostat

  5. PACA 2-way communication with Daikin VRV over serial

  6. Is there any problem, If i connect powersupply at load channels..??

  7. Can anyone to share your serials code with PACA?

  8. is there a way to "TrackGroup" across multiple network..?

Loading...