PAC Firmware Update

The GetCBusTargetLevel and GetCBusRampRate functions in V2.3 of the PAC firmware were not working properly. An update of the PAC firmware is available to fix this problem. If you are not using these functions, you do not need to get the update.

PAC firmware update installer

 

I just received a PACA and added it the my system.
The firmware in Toolkit 1.4 shows 4.4.00 which is the same as what shows for the 5500CN and the Wireless Gateway.

Is Toolkit showing the wromg firmware levels?

Martin

 

Toolkit is showing you the firmware version for the C-Bus interface inside the PAC. There is a second processor in the unit that does the logic processing and the firmware version for this is only shown when connected to the unit via the USB programming cable in the PICED software.

 

Thanks
Martin