Overlapping Scenes

Hi All

Got some unexpected behavior with overlapping scenes.

These are lighting scenes use to light the path from a carport to the house entrance. And depending on which direction you are going e.g. house to carport or carport to house you want a different sequence of lights. Also don't want all the lights to be triggered at once.

Have
- 3 scenes with different trigger groups
- each trigger group is 255 scene ON, 0 is scene OFF
- each trigger group is controlled by a PIR
- scene 1 shares lights with scene 2
- scene 2 also has its unique set of lights
- scene 2 shares lights with scene 3

The issue is when scene 1 is triggered and you walk to the PIR that controls scene 2 momentarily the shared lights in scene 2 go off and then back on.

Same thing happens when you trigger scene 3 and then walk to the PIR that triggers scene 2 and the shared lights in scene 3 go off and then back on.

Thanks for your advice

 

Is something switching off the groups in scene 1 when scene 2 gets switched on? If so, then what you are seeing is expected behaviour.