over riding light controlled by clipsal minder

Discussion in 'C-Bus Toolkit and C-Gate Software' started by weskate, Oct 1, 2014.

  1. weskate

    weskate

    Joined:
    Jun 25, 2014
    Messages:
    7
    Likes Received:
    0
    Location:
    perth
    hey guys

    working on a site where there is a clipsal minder controlling outside lights.
    i need to work out a way to override these lights- i cant do it at the dimmer/relay as its an older style with just terminals.

    when i try in toolkit to turn the lights (groups) on- minder will turn them off immediately.

    i watch it happen in the app log.

    any ideas??

    thanks
     
    weskate, Oct 1, 2014
    #1
  2. weskate

    rhamer

    Joined:
    Aug 3, 2004
    Messages:
    673
    Likes Received:
    3
    Location:
    Melbourne, Australia
    I'm assuming you don't have the minder project?

    If it's only temporarily while you work on something, then just unplug the C-Bus cable from minder.

    Another option is reprogram the group address in the dimmer, do what you need, then put it back again.

    Rohan
     
    rhamer, Oct 1, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.