Outside lights scheduling + dimming

Discussion in 'C-Bus Wired Hardware' started by DunbarAutomation, Jul 11, 2022.

  1. DunbarAutomation

    DunbarAutomation

    Joined:
    Jul 11, 2022
    Messages:
    5
    Likes Received:
    0
    Hey there, a client has requested his outside lights come on at sunset and off at 10pm. I will be using a wiser mkII for this. However he is worried that the outside lights will be to bright and has asked me if he would be able to set them to a preferred brightness and they will stay at that set brightness forever. I’m kind of stuck in the sense that I know I can program the lights to turn on at 75% however I’m not sure how he would be able to tweek this on the wiser app or a eDLT. Any ideas are appreciated!
     
    DunbarAutomation, Jul 11, 2022
    #1
  2. DunbarAutomation

    Graham Lamb

    Joined:
    Aug 3, 2004
    Messages:
    94
    Likes Received:
    12
    Location:
    Sydney, Australia
    Hi
    If you are using a cbus dimmer put a new group address in the logic box and tick the channel you need to set level to and set to max level for that channel then put that group address in eDLT then customer can adjust level.
     
    Graham Lamb, Jul 11, 2022
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Scheduling lights on and off

  2. Scheduling Thermostat 5070THPR,BK

  3. LED lighting dimming & non-dimming.

  4. Need to flash outside lights

  5. Time Scheduling in wiser home control

  6. Scheduling and the Midnight Hour

  7. Irrigation scheduling

  8. Cheapest way for scheduling

Loading...