OT: Remote reset of mcb

Discussion in 'General Discussion' started by Aaron, Dec 2, 2011.

  1. Aaron

    Aaron

    Joined:
    Jul 16, 2009
    Messages:
    99
    Likes Received:
    0
    Location:
    Wales, UK
    Hi All,

    To comply with the protection of the dimmer outputs I have installed 1A /2A mcb's on the load side.
    problem is they tend to be in 'not too easy' an accessible position - attics / garages etc.
    when a lamp fails sometimes they take out these load side mcb's - I understand this is required to protect the dimmer units output channel.

    Anyway, my question is it possible to get a 'unit' that can attach to an existing dist/board and allow remote resetting of and mcb?
    which could ideally be wired to operate from a c-bus output :)

    TIA, Aaron
     
    Aaron, Dec 2, 2011
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Official recommended Fusing & MCB for CBus modules

  2. mcb chatter

  3. MCB's and Wire

  4. MCB's and Wire

  5. Dimmers and MCB's

  6. MCB In & Out

  7. Professional High powered dimmers - mcb protection

  8. Power ON Multi room audio remote amplifier after power reset?

Loading...